7.10 Diagnostics - Polaris PAC PAGAUT Owner's Manual

Pool Automation Control | Owner's Manual
Polaris ® PAC ™
Allow Jandy Valve Actuators (JVAs) to be assigned to
®
any auxiliary on the Polaris PAC controller, so that when
you select this auxiliary, the valve turns. Assigning JVAs
lets the pool owner control certain features like diverting
water to a waterfall or bank of spa jets. Multiple JVAs
can be assigned to one auxiliary without extra hardware.
INSTALL SETTINGS
Color Lights >
Label Aux >
Temp Calibrate >
Solar Priority >
Assign JVA >
>
More
ASSIGN JVA
Solar
None
Aux1
Aux2
Aux3

7.10 Diagnostics

INSTALL SETTINGS>DIAGNOSTICS
For troubleshooting purposes, view diagnostic
information relating to current firmware revisions,
system alerts or error messages, and status of devices
connected to the RS-485 controller.
View Revision Number:
INSTALL SETTINGS>DIAGNOSTICS>REVISIONS
View your system firmware revision number for
troubleshooting.
INSTALL SETTINGS
Diagnostics >
More
REVISIONS
UI: 1.3
Bootloader: 0.26
SWC:
FFC: 0.18
iAquaLink: 2.1.4
ASSIGN JVA
Solar Free
DIAGNOSTICS
Revisions >
Alerts >
RS-485 Devices >
View Alert Messages
INSTALL SETTINGS>DIAGNOSTICS>ALERTS
View alerts or error messages. See Section 10. Glossaries
for a complete list and explanation of all system messages.
DIAGNOSTICS
Revisions >
Alerts >
RS-485 Devices >
• Screen is blank if the controller has no errors to
report.
View RS-485 Device Status:
INSTALL SETTINGS>DIAGNOSTICS>RS-485 DEVICES
View status of devices connected to the RS-485 controller.
Depending on your equipment configuration, any
combination of the following equipment may be displayed:
FFC - Polaris PAC Controller
•
iAL - iAquaLink
•
DIAGNOSTICS
Revisions >
Alerts >
RS-485 Devices >
Page 11
ENGLISH
CURRENT ALERTS
[BLANK UNTIL AN
ALERT OCURS]
RS-485 DEVICES
FFC: 100%
iAL: 100%