4-Carrier Configuration (Requires 12 Measurements) - Motorola SC 4812T-MC Technical Information

SC 4812T-MC BTS READ-ME-FIRST (Optimization/ATP)

4-Carrier Configuration (requires 12 measurements)

Sector Carrier 1 Carrier 2
1 BBX-1
2
3
1. Enable BBX-1, BBX-8, BBX-6, and BBX-12.
2. Measure TX power from at sector 1 carrier 1
(C1-S1) and sector 2 carrier 2 (C2-S2).
3. Disable BBX-1, BBX-8, BBX-6, and BBX-12.
Sector Carrier 1 Carrier 2
1
2
3 BBX-3
7. Enable BBX-3, BBX-7, BBX-5, and BBX-11.
8. Measure TX power of C1-S3 and C2-S1.
9. Disable BBX-3, BBX-7, BBX-5, and BBX-11.
Sector Carrier 1 Carrier 2
1
2 BBX-2
3
13.Enable BBX-2, BBX-8, BBX-6, and BBX-10.
14.Measure TX power of C3-S3 and C4-S1.
15.Disable BBX-2, BBX-8, BBX-6, and BBX-10.
RMF-6
Use this procedure to take measurements with all 4 carriers enabled. The
sector with 2 carriers active will not be measured.
Carrier 3 Carrier 4
BBX-8
BBX-6 BBX-12
Carrier 3 Carrier 4
BBX-7
BBX-5 BBX-11
Carrier 3 Carrier 4
BBX-10
BBX-8
BBX-6
1X SC 4812T-MC Multicarrier BTS Optimization/ATP
Sector Carrier 1
1
2 BBX-2
3
Procedure:
4. Enable BBX-2, BBX-9, BBX-4, and BBX-10.
5. Measure TX power of C1-S2 and C2-S3.
6. Disable BBX-2, BBX-9, BBX-4, and BBX-10.
Sector Carrier 1
1 BBX-1
2
3
Procedure:
10.Enable BBX-1, BBX-7, BBX-5, and BBX-12.
11.Measure TX power of C3-S2 and C4-S3.
12.Disable BBX-1, BBX-7, BBX-5, and BBX-12.
Sector Carrier 1
1
2
3 BBX-3
Procedure:
-
16.Enable BBX 3, BBX
17.Measure TX power C3-S1 and C4-S2.
-
18.Disable BBX
68P64115A21–B
Carrier 2 Carrier 3
BBX-4
BBX-9
Carrier 2 Carrier 3
BBX-7
BBX-5
Carrier 2 Carrier 3
BBX-4
BBX-9
- -
9, BBX 4, and BBX
- -
3, BBX 9, BBX 4, and BBX
Carrier 4
BBX-10
Carrier 4
BBX-12
Carrier 4
BBX-11
-
11.
-
11.
Sept 2003