Optional Equipment - Motorola SC 4812T-MC Technical Information

Required Test Equipment and Software
1

Optional Equipment

1-12
NOTE Not all optional equipment specified here will be supported by
the LMF in automated tests or when executing various
type command line interface (CLI) commands. It is meant to
serve as a list of additional equipment that might be required
during maintenance and troubleshooting operations.
Frequency Counter
Stanford Research Systems SR620 or equivalent. If direct
S
measurement of the 3 MHz or 19.6608 MHz references is required.
Spectrum Analyzer
Spectrum Analyzer (HP8594E with CDMA personality card) or
S
equivalent; required for manual tests.
Local Area Network (LAN) Tester
Model NETcat 800 LAN troubleshooter (or equivalent); used to
S
supplement LAN tests using the ohmmeter.
Span Line (T1/E1) Verification Equipment
As required for local application
S
Oscilloscope
Tektronics Model 2445 or equivalent; for waveform viewing, timing,
S
and measurements or during general troubleshooting procedure.
2–way Splitter
Mini–Circuits Model ZFSC–2–2500 or equivalent; provides the
S
diversity receive input to the BTS
High Stability 10 MHz Rubidium Standard
Stanford Research Systems SR625 or equivalent – required for CSM
S
and Low Frequency Receiver/High Stability Oscillator (LFR/HSO)
frequency verification.
Itasca Alarms Test Box
Itasca CGDSCMIS00014 – This test box may be used as a tool to
S
assist in the testing of customer alarms.
1X SC 4812T-MC Multicarrier BTS Optimization/ATP
68P64115A21–B
measure
Sept 2003