K&K Sound Pure Mini Installation Manual page 9

4. With the included putty, form a small ball and stick
it on top of the jig, above the point where the saddle
and high E string intersect. (Note: On the high E string
we place the pickup directly under the high E string, for
the G/D string pickup and A/E string pickup we place it
between the strings.)
Make
pickup sits parallel
to the surface of
the jig.
5. Place one pickup on the putty with the golden side
facing up and press the pickup to the putty. It should
hold the pickup in place securely enough to allow for
the installation.
Make sure the pickup sits
parallel to the surface of
the jig.
Tip: Don't use too much
putty -- aim for a piece
that's just a bit smaller
than the pickup head.
sure the
9