Table of Contents
Advertisement
1. PACKAGE CONTENTS
•
3 transducers with cable harness and endpin jack.
The Pure Mini uses 3 identical transducers. It does
not matter in which position (high e/b string, g/d
string, low e/a string) you install them.
•
Manual
•
Accessories pack (see photo, from left to right)
•
Jig (remove protective foil before use)
•
White pin & golf tee
•
Putty (remove protective foil before use)
•
Double-sided tape for peel-and-stick install
2. TOOLS/SUPPLIES NEEDED
•
Superglue gel (any brand of Cyanoacrylate glue will
do as long as it is gel)
•
Electric drill (for endpin jack mount)
•
Drill bits, at least 3/8" (10mm) and ½" (12mm for
endpin jack mount), endpin reamer or ½" Forstner
bit
•
Pliers or wrench for endpin jack installation
4
Advertisement
Table of Contents
Need help?
Do you have a question about the Pure Mini and is the answer not in the manual?
Questions and answers