Viewing The Current Site; Changing The Current Site - Motorola APX 1000 User Manual

Follow the procedure to lock and unlock a site using the radio menu.
Procedure:
1 Press the Menu Select button directly below Site.
2 Perform one of the following actions:
• To lock the site, press the Menu Select button directly below Lock. The display shows Site
locked.
• To unlock the site, press the Menu Select button directly below Unlk. The display shows
Site unlocked.
The radio saves the new site lock state and returns to the Home screen.
7.13.5

Viewing the Current Site

Procedure:
1 Perform one of the following actions:
• Press the preprogrammed Site Displ/Srch button.
• Press the Menu Select button directly below RSSI.
2 Press the programmed Site Displ/Srch button.
The display shows momentarily the name of the current site and its corresponding received RSSI.
7.13.6

Changing the Current Site

Procedure:
Perform one of the following actions:
• Press and hold down the preprogrammed Site Displ/Srch button.
• Press and hold down the Menu Select button directly below RSSI.
You hear a tone and the display shows momentary Scanning site.
When the radio finds a new site, it returns to the Home screen.
7.14
ASTRO 25 (P25) Programming Over Project 25 (POP25)
Also called Over-the-Air Programming, this feature allows configuration data and firmware to be
upgraded to your radio over-the-air. Full use of the radio is retained during the data transfer without
interrupting communication.
If the upgrade happens on the ASTRO 25 and ASTRO Conventional systems, the upgrade pauses to
give priorities to voice call, and continues after the voice call ended. If the upgrade happens on a Wi-Fi
network, the upgrade process runs concurrently with voice calls.
Once a configuration upgrade is downloaded to your radio, you can install new changes immediately or
delay changes to be installed on the radio when it is being powered up.
MN000253A01-BN
Chapter 7 : Advanced Features
45