Motorola APX 1000 User Manual page 22

Model 1.5
Hide thumbs Also See for APX 1000:
Table of Contents

Advertisement

MN000253A01-BN
Chapter 5 : General Radio Operation
5.3
Mode Select Feature
Mode Select allows a long press to save the current zone and channel of your radio to a programmable
button, or a softkey. Once programmed, the short-press of that button or softkey changes the
transmission to the saved zone and channel.
NOTE: Your radio must be preprogrammed for you to use this feature.
5.3.1
Saving a Zone and a Channel to a Softkey
When and where to use:Five softkeys are available for you to save the frequently used zone and
channel.
Procedure:
1 Toggle from your current zone and channel to the required zone and channel.
2 Press and hold the Menu Select button directly below one of the softkeys (MS1–MS5).
You hear a short, medium-pitched tone when the zone and channel is saved.
NOTE: To change the programmed zone and channel, repeat this procedure.
Short press of the programmed softkey changes your current transmission to the zone and
channel programmed in this softkey.
5.3.2
Saving a Zone and a Channel to a Button
When and where to use:You can save the frequently used zone and channel to the programmable
buttons.
Procedure:
1 Toggle from your current zone and channel to the required zone and channel.
2 Press and hold the button you desire to program.
You hear a short, medium-pitched tone when the zone and channel is saved.
NOTE:
Short press of the programmed button changes your current transmission to the zone and
channel programmed in this button.
5.4
Receiving and Responding to a Radio Call
Once you have selected the required channel and/or zone, you can proceed to receive and respond to
calls.
The radio shows different indicators based on the system the radio is configured.
The LED lights up solid red while the radio is transmitting.
In conventional mode, the LED lights up solid yellow when the radio is receiving a transmission.
In trunking mode, there is no LED indication when the radio receives a transmission.
If the radio is receiving a secure transmission, the LED blinks yellow.
22

Advertisement

Table of Contents
loading

Table of Contents