Folding (Fig F1 & F2); Veiligheidssleutel (Fig. F-3); Monitor (Fig. E-1); Toetsen - Tunturi Cardio Fit T5 User Manual

Hide thumbs Also See for Cardio Fit T5:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
Folding (Fig F1 & F2)
Folding up
The equipment can be folded to store your trainer space-saving for
your convenience�
-
Turn the power switch in "OFF" mode�
-
Remove the power cord from the wall outlet socket�
-
Loosen knob (7) located on the bottom (LH) side of the trainer, and
remove it from the frame�
-
Fold up the running deck smoothly to avoid the upright frame to
fall over� (holding fixation knob (7) in your hand already)
Avoid the power cord from being pinched while folding up�
-
Fit the fixation knob (7) halfway down the (LH) upright tube and fix
it into the fixation slot of the running deck, and fix it firmly�
Do not let go of the treadmill running deck before fully fixed again,
as it can accidentally fall down when not fixed properly�
-
Store the power cord where it will not be damaged, pinched, or
causes a trip hazard�
Folding down
-
Loosen the fixation knob (7) halfway down the (LH) upright tube
while supporting the running deck, and remove it from the frame�
-
Fold down the treadmill deck supporting it all the way down�
Avoid the power cable from being pinched while unfolding�
-
Fit fixation knob on the bottom (LH) side of the trainer and fix it
firmly�
Refer to the illustrations for the correct way of unfolding and folding
the equipment�

Veiligheidssleutel (fig. F-3)

Het toestel is uitgerust met een veiligheidssleutel die juist in de
console moet worden geplaatst om het toestel te starten� Als u
de veiligheidssleutel uit de console verwijdert, stopt het toestel
onmiddellijk�
- Plaats de veiligheidssleutel in de sleuf in de console�
- Zorg ervoor dat de clip van de veiligheidssleutel juist aan uw
kleding vastzit� Zorg ervoor dat de clip pas van uw kleding wordt
gehaald wanneer de veiligheidssleutel uit de console is verwijderd�
‼ LET OP
• Monitor laat code "- - - -" zien als veiligheidssleutel niet, of niet
juist is geplaatst�

Monitor (fig. E-1)

⚠ VOORZICHTIG
• Houd de console uit de buurt van direct zonlicht�
• Droog het oppervlak van de console wanneer het met
zweetdruppels is bedekt�
• Leun niet op de console�
• Raak de display alleen met uw vingertop aan� Raak de display
niet aan met uw nagels of een scherp voorwerp�
‼ LET OP
• De console gaat naar standby wanneer het toestel gedurende 10
minuten niet wordt gebruikt�

Toetsen

Mode (modus)
- Selecteer de programmeerstand (P0 ~ P12)
- Bevestig de instelling om naar de volgende stap in de
programmeerstand te gaan�
Set (instellen)
- Stel de doel(en) voor je workout in wanneer je in de
programmeerstand bent�
Start/ stop
- Start de geselecteerde workout na een countdown van 5 seconden
wanneer het toestel in de stopstand staat�
- Als het toestel in de workout-stand staat, komt het geleidelijk tot
stilstand�
Enkele pijl omhoog (+ 0,1)
- Hiermee wordt de snelheid verhoogd in stappen van 0,1 km/uur�
- Als je de toets twee seconden ingedrukt houdt, gaat de snelheid
sneller omhoog�
- Hiermee verhoog je de doelwaarden wanneer je in de
programmeerstand bent�
Afstand
+ 0,1 km
Calorieën
+ 1,0 kilocal�
Tijd
+ 1,0 min�
Dubbele pijl omhoog (+ 1,0)
- Hiermee wordt de snelheid verhoogd in stappen van 1,0 km/uur�
- Als je de toets twee seconden ingedrukt houdt, gaat de snelheid
sneller omhoog�
- Hiermee verhoog je de doelwaarden wanneer je in de
programmeerstand bent�
- Hiermee verhoog je de doelwaarden wanneer je in de
programmeerstand bent�
Afstand
+ 1,0 km
Calorieën
+ 10 kilocal�
Tijd
+ 10 min�
Enkele pijl omlaag (- 0,1)
- Hiermee wordt de snelheid verlaagd in stappen van 0,1 km/uur�
- Als je de toets twee seconden ingedrukt houdt, gaat de snelheid
sneller omlaag�
- Hiermee verlaag je de doelwaarden wanneer je in de
programmeerstand bent�
Afstand
- 0,1 km
Calorieën
- 1,0 kilocal�
Tijd
- 1,0 min�
Dubbele pijl omlaag (- 1,0)
- Hiermee wordt de snelheid verlaagd in stappen van 1,0 km/uur�
- Als je de toets twee seconden ingedrukt houdt, gaat de snelheid
sneller omlaag�
- Hiermee verlaag je de doelwaarden wanneer je in de
programmeerstand bent�
Afstand
- 1,0 km
Calorieën
- 10 kilocal�
Tijd
- 10 min�
‼ OPMERKING
• De bedieningstoetsen voor de snelheid werken alleen in de
workout-stand P0�

Uitleg van de items op het display

Speed (snelheid)
- Geeft in de programmeerstand het geselecteerde programma
weer�
- Geeft - wanneer je op de toets 'Start' drukt - een countdown van 5
seconden weer�
- Geeft in de workout-stand de werkelijke snelheid van de loopband
weer�
Weergavebereik: 1,0 ~ 10,0 km/uur ± 0,1 km/uur
4 3
NL

Advertisement

Table of Contents
loading

This manual is also suitable for:

21tcft0050

Table of Contents