1. Listening to the FM broadcasting
· Adjust the frequency of broadcasting you want by pushing ether
AUTO SCAN function
The frequency on the broadcasting is automatically searched by pushing and holding either
button after releasing the PRESET.
-
When you searching the frequency by AUTO SCAN, please set receiving sensitivity using FM
SCAN LEVEL of control mode.
-
Set low SCAN LEVEL when frequency is not searched by AUTO SCAN.
-
To stop the Auto Scan function, press the On/Off button.
2. FM Broadcasting Memory
· Adjust to the frequency you want by using ether
·
Click A-B/EQ button and Choose to Memory Mode.
(Before)
(After)
or
16
or
button
button.
or