Casio PX-130 Service Manual & Parts Manual page 38

5. Pedal check
<About the pedal>
If there is no pedal unit for testing, go on to the "6. Headphones check".
The pedal unit SP-3 is used in Step (1).
The pedal unit SP-32 is used in Step (2) - (5).
1. Press the "SP-3" pedal.
The confirmation chord
2. Press the "SOFT" pedal.
The confirmation chord E4 sounds and the "MODERN" LED lights.
3. Press the "SOSTENUTO" pedal.
The confirmation chord G4 sounds and the "CLASSIC" LED lights.
4. Press the "DAMPER" pedal (ON HALF).
The confirmation chord C4 sounds and "ELEC PIANO" LED flashes.
5. Press the "DAMPER" pedal firmly (ON FULL).
The confirmation chord C4 sounds and the "ELEC PIANO" LED lights.
6. Headphones check
1. Press the "FUNCTION" button to perform the "Headphones check".
The confirmation chords C4, E4, G4 sound and the "L" LED lights.
2. Connect the headphones to the jack in the front of the main unit.
The "L" LED turns off and the "R" LED illuminates.
3. Press the "A4" key.
4. Remove the headphones from the jack.
The "R" LED turns off and the "L" LED illuminates.
5. Connect the headphones to the jack in the back of the main unit.
The "L" LED turns off and the "R" LED illuminates.
6. Press the "A4" key.
7. Remove the headphones from the jack.
The "R" LED turns off and the "L" LED illuminates.
7. USB check
1. Press the "FUNCTION" button to perform the "USB check".
The confirmation chords C4, E4, G4 sound.
2. Connect PX-130 to the PC with a USB cable.
3. Press the "MODERN" button.
The "R" LED illuminates instantaneously, and the confirmation chord C6 sounds.
4. Disconnect the USB cable.
C4 sounds and the "ELEC PIANO" LED lights.
– 36 –