Installing The Propeller - NAUTICA AERO NTDR01 Instruction Manual

HOW TO PREPARE FOR FLIGHT

Installing the Propeller

Your Nautica Aero NTDR01 comes with pre-installed
propellers, you would not need to install them prior
to your first flight.
If you need to replace the propellers, however, follow
these steps:
1. Loosen the propeller holding apparatuses with the
help of the included mounting tool, as shown in
the image.
2. Displace the old propeller and put the holding
apparatus back onto the new propeller.
3. Make sure the new propeller is locked by screwing
the apparatus back.
Pay attention to the correct placement of the
propellers to ensure that your drone can takeoff
successfully. Incorrect
propellers will hinder your drone's ability for
flight.
Your NauticaAero NTDR01 comes with 4 extra
propellers to ensure you will be able to replace
them in a situation of breakage or loss.
placement of the
Installing the Propeller Guards
Four propeller guards included in the package
ensure that your drone's propellers are
protected from damages in any unexpected
hits or crashes.
1. Place the propeller guards to each wing as shown in
the image.
8