Page 3
Thank you for purchasing an original Nautica Aero - NTDR01 You are getting a high-quality product that’s built to combine technology and design for your everyday use. Please read the below info carefully to get the most out of your new product.
HOW TO PREPARE FOR FLIGHT Installing the Propeller Your Nautica Aero NTDR01 comes with pre-installed propellers, you would not need to install them prior to your first flight. If you need to replace the propellers, however, follow Installing the Propeller Guards these steps: 1.
Page 9
Installing and Recharging the Battery Installing the Remote Controller Your Nautica Aero NTDR01 comes with the battery 1. Open the battery compartment of the remote pre-installed and fully charged. When you need to controller by turning the screw counterclockwise. recharge the battery, follow the steps below.
Page 10
• Make sure that you have authorization to pilot the Connecting Your Drone With Remote Controller Aero NTDR01 in the area you intend to fly. In some areas flying a drone is not permitted, such as When you turn your Nautica Aero NTDR01 and its military bases, parks, cities and airports.
Page 11
After the sound beep, the LEDs of the drone will flash for 2 seconds, indicating that your Nautica Aero NTDR01 has been calibrated and is ready to takeoff. When taking off, the rear should be faced towards you, while the front should direct forward.
Page 12
Automatic Takeoff and Landing Movements and Trim 1. Place Nautica Aero NTDR01 on a flat and dry Auto Takeoff: Drone will surface. takeoff from the ground for 2. Push the automatic takeoff/landing button on the about up to 5 ft/1.5 m high remote control.
Page 13
Right joystick pushed Trim Forward: Drone will trim upward: Drone will move forward while moving forward. Right joystick pulled back: backward. Drone will move backward. Trim Backward: Drone will Right joystick pushed trim backward while moving left or right: Drone will forward.
Page 14
Photo Shooting movements. and Video Recording The default speed mode of Nautica Aero NTDR01 is 30%. The R1 button pushed once, the speed increases to 60%, with the device delivering two beep-sound notifications. Pushed once more, the R1 button enhances the speed to maximum of 100%, notifying the pilot with a three beep sounds.
Page 15
Flight With Smartphone If you wish to fly and navigate your Nautica Aero NTDR01 with your smartphone rather than the remote controller, follow these guidelines. Make sure you installed the Nautica AERO app on your smartphone, as explained in the “Downloading application”...
Turn ON/OFF Auto Takeoff / Turn ON Speed Photo Landing Video Gallery Mode Gyro the Motors shoot Back to Settings Main Menu System Camera Add Music Reverse Headless VR Box Calibrate Setting to Video The Camera Mode Mode Camera Trim Zoom Auto Auto...
Page 17
Photo and Video Shoot With Hand Sense Turn ON the autopilot function by tapping TURN ON The Hand Sense system of Nautica Aero NTDR01 AUTOPILOT button. Auto takeoff and landing enables you to take photos and videos with your hand...
Page 18
Gyro Another way of controlling your drone’s movements is activating “Gyro” by tapping on the related button on the application screen. It enables to control drone movement by tilting your smartphone.
TECHNICAL SPECIFICATIONS Input 4.2V / 0.6A Battery Capacity 1800 mAh Max Flight Time up to 14 min Video Resolution HD 1080p Max Speed 11.1 mph (5 m/s) Camera Resolution Max Transmission Distance up to 70 m Max Video Transmission Distance up to 20 m Autopilot Take Off and Landing Emergency Landing...
Please use the product according to the specified instructions and do not attempt to repair it without professional assistance. Do not expose your Nautica Aero NTDR01 and its electronic parts to extremely hot (fire, direct sunlight, etc.) or cold conditions.
Page 21
Do not use damaged charging cables or power Also, using the device for a long period of time may sockets to charge your device. cause sweating. Make sure to dry your device with a Keep the charging port dry as liquid leaks may soft and clean cloth after using it for an extended cause the device to short-circuit.
Warranty You must have purchased the product from a Nautica applies to the USA only. or Technofashion authorized dealer. We will make every effort to replace limited edition...
Page 23
SUPPORT For any questions, email us at If this device does cause harmful interference to radio support@technofashion.com or television reception, which can be determined by turning the device off and on, the user is encouraged FCC ID: 2AZBO-N00014 to try to correct the interference by one or more of the following measures: This device complies with Part 15 of the FCC Rules.