NAUTICA AERO NTDR01 Instruction Manual page 14

L2 Button
Callback
Mode Switch / Changing Speed
The R1 button of the remote controller enhances wind
resistance of your drone or enables you to make sharper
movements.
The default speed mode of Nautica Aero NTDR01 is
30%. The R1 button pushed once, the speed increases
to 60%, with the device delivering two beep-sound
notifications. Pushed once more, the R1 button
enhances the speed to maximum of 100%, notifying the
pilot with a three beep sounds.
At the maximum speed, push R1 button once more to
go back to 30% speed level, with one-beep notification
sound.
Photo Shooting and Video Recording
R2 Button
Headless mode
and Video Recording
The camera is located at the front on the
Nautica Aero NTDR01. The camera located
under the drone is for stabilization only. Hit the
L1 button once for taking a photo. Push and
hold the L1 button for starting to record a
video.
L1 Button
Photo Shooting
Camera
R1 Button
Mode Switch /
Changing Speed
14