NAUTICA AERO NTDR01 Instruction Manual page 12

Automatic Takeoff and Landing
1. Place Nautica Aero NTDR01 on a flat and dry
surface.
2. Push the automatic takeoff/landing button on the
remote control. Your drone will takeoff and hover at
about 5 ft / 1.5 m from the ground.
3. If you push the left joystick forward, the drone will
gain altitude while it will lose altitude if the left
joystick is pushed backward. When you leave the left
joystick ensuring that it goes back to its original
position, the drone will remain steady at its current
location.
4. During the flight, push the automatic takeoff/landing
button once more to enable your drone to
Auto Takeoff
Auto Landing
Movements and Trim
Auto Takeoff: Drone will
takeoff from the ground for
about up to 5 ft/1.5 m high
and stay suspended in the air.
Auto Landing: Drone will
securely land in the closest
surface while in the air. When
pushed for a while, drone will
throttle and make an
emergency landing.
Trim Right: Drone will trim right
while moving left.
Trim Left: Drone will trim left
while moving right.
12