Removing A Instaview Pcb - LG LSEL6335F Service Manual

WARNING
• DISCONNECT power supply cord
from the outlet before servicing.
• Replace all panels and parts before
operating.
• RECONNECT all grounding devices.
- Failure to do so can result in severe personal
injury, death or electrical shock.
CAUTION
• Be careful when you work on the
gas range handling the sheet metal
part.
- Sharp edge may be present and you can cut
yourself.
1. Turn off the electrical supply and gas supply
going to the range.
2. Remove the oven door from the range (see
"Removing the Oven Door" Page 3-16).
3. Pull the range away from the wall so you can
access the back of the unit.
4. Remove the back cover (see "Removing the Back
Cover" Page 3-2).
5. Remove the cooktop plate (see "Removing the
Cooktop Plate" Page 3-4).
6. Remove the controller panel (see "Removing the
Controller Panel" Page 3-5).
7. Remove the side panel (see "Removing the Side
Panel" Page 3-20).
8. Remove the 1 screw on the drawer panel front.
Copyright © LG Electronics Inc. All rights reserved.
Only training and service purposes
COMPONENT ACCESS

REMOVING A InstaView PCB

3-20
9. After removing the harness, pull out the PCB
supporter.