Parts Listings; Optional Parts; Limited Warranty - Horizon Hobby Blade Infusion 180 Instruction Manual

Parts Listings

Part #
1 BLH7001 180mm Main Blade Set: Infusion
2 BLH7002 Main Rotor Headblock: Infusion
3 BLH7003 Main Blade Grips: Infusion 180
4 BLH7004 FBL Links: Infusion 180
5 BLH7005 Spindle (2): Infusion 180
6 BLH7006 Main Shaft: Infusion 180
7 BLH7007 Swashplate: Infusion 180
8 BLH7008 Carbon Frame (1): Infusion 180
9 BLH7009 Canopy: Infusion 180
10 BLH7010 Landing Gear Mount: Infusion 180
11 BLH7011 Landing Gear: Infusion 180
12 BLH7012 Main Mounting Plate: Infusion 180
13 BLH7013 Body Posts: Infusion 180
14 BLH7014 Anti-Rotation Bracket: Infusion

Optional Parts

Part # Description
SPMX6003S50 600mAh 3S 11.1V Smart G2 50C; IC2
SPMXCA320 Adapter: IC3 Batt / IC2 Dev 6
SPMXC1080 Smart S 1100 AC Charger, 1x100W

Limited Warranty

What this Warranty Covers
Horizon Hobby, LLC, (Horizon) warrants to the original purchaser
that the product purchased (the "Product") will be free from
defects in materials and workmanship at the date of purchase.
What is Not Covered
This warranty is not transferable and does not cover (i) cosmetic
damage, (ii) damage due to acts of God, accident, misuse, abuse,
negligence, commercial use, or due to improper use, installation,
operation or maintenance, (iii) modification of or to any part of the
Product, (iv) attempted service by anyone other than a Horizon
Hobby authorized service center, (v) Product not purchased from
an authorized Horizon dealer, (vi) Product not compliant with
applicable technical regulations, or (vii) use that violates any
applicable laws, rules, or regulations.
OTHER THAN THE EXPRESS WARRANTY ABOVE, HORIZON
MAKES NO OTHER WARRANTY OR REPRESENTATION, AND
HEREBY DISCLAIMS ANY AND ALL IMPLIED WARRANTIES,
INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES
OF NON-INFRINGEMENT, MERCHANTABILITY AND FITNESS FOR
A PARTICULAR PURPOSE. THE PURCHASER ACKNOWLEDGES
THAT THEY ALONE HAVE DETERMINED THAT THE PRODUCT WILL
SUITABLY MEET THE REQUIREMENTS OF THE PURCHASER'S
INTENDED USE.
Purchaser's Remedy
Horizon's sole obligation and purchaser's sole and exclusive
remedy shall be that Horizon will, at its option, either (i) service,
or (ii) replace, any Product determined by Horizon to be defec-
tive. Horizon reserves the right to inspect any and all Product(s)
Description Part #
15 BLH7015
16 BLH7016
17 BLH7017
18 BLH7018
19 BLH7019
20 BLH7020
21 BLH7021
22 BLH7022
23 SPMAR6251MHX
24 SPMSH2080
25 SPMXAE1020A
26 SPMXHM1005
27 SPMXHM1010
involved in a warranty claim. Service or replacement decisions
are at the sole discretion of Horizon. Proof of purchase is
required for all warranty claims. SERVICE OR REPLACEMENT AS
PROVIDED UNDER THIS WARRANTY IS THE PURCHASER'S SOLE
AND EXCLUSIVE REMEDY.
Limitation of Liability
HORIZON SHALL NOT BE LIABLE FOR SPECIAL, INDIRECT,
INCIDENTAL OR CONSEQUENTIAL DAMAGES, LOSS OF
PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY
WAY, REGARDLESS OF WHETHER SUCH CLAIM IS BASED IN
CONTRACT, WARRANTY, TORT, NEGLIGENCE, STRICT LIABILITY
OR ANY OTHER THEORY OF LIABILITY, EVEN IF HORIZON HAS
BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Further,
in no event shall the liability of Horizon exceed the individual price
of the Product on which liability is asserted. As Horizon has no
control over use, setup, final assembly, modification or misuse,
no liability shall be assumed nor accepted for any resulting
damage or injury. By the act of use, setup or assembly, the user
accepts all resulting liability. If you as the purchaser or user are
not prepared to accept the liability associated with the use of the
Product, purchaser is advised to return the Product immediately
in new and unused condition to the place of purchase.
Law
These terms are governed by Illinois law (without regard to
conflict of law principals). This warranty gives you specific legal
rights, and you may also have other rights which vary from state
to state. Horizon reserves the right to change or modify this war-
ranty at any time without notice.
17
Description
Front Tail Boom Mount: Infusion 180
Tail Boom (2): Infusion 180
Tail Motor Mount: Infusion 180
Vertical Tail Fin: Infusion 180
Tail Prop (2): Infusion 180
Radial Bearing: 4x9x4mm
Pushrod Set (3): Infusion 180
Ball and Link Set: Infusion 180
Infusion 180 AS3X®/ Smart® receiver
12g MG Heli Cyclic Servo
Brushless ESC: Infusion 180
4004 - 650Kv Brushless Main Motor
1104-5500Kv Brushless Tail Motor
EN