Disassembling The Mechanism/Main Pwb Assembly - Sharp VC-H992U Service Manual

2-2 DISASSEMBLING THE MECHANISM/MAIN PWB ASSEMBLY

1. When removing the mechanism from the main PWB,
remove the antenna cover 1 screw 1, and remove the
antenna cover.
Remove the PWB bottom plate 1 screw 2.
Remove the FFC cable (AA, AD, AH) 3 which connect-
ing the PWB and the mechanism.
Take out vertically the mechanism so that it does not
damage the adjacent parts.
CASSETTE
HOUSING
4
2. Removing the mechanism and cassette housing.
Remove 2 screws 4 fixing the cassette housing to the
mechanism, and remove the cassette housing.
MECHANISM CHASSIS
1
3
2
7
VC-H992U
VC-H992U(A)
MAIN PWB