Indicators & Adjustments - Hunter 40135 Installation And Operation Manual

InDICATOrS AnD ADjUSTMEnTS, COnT.
Your thermostat is preset to cycle your system
off and on at 1
Temperature. For maximum system efficiency and
a sustained comfortable temperature your system
should cycle 3 - 5 times per hour. If your system is
cycling either too often or not often enough, then
use a small Phillips-head screwdriver to turn the
s a
pan djust
1. remove the top cover from the thermostat.
2. To make your system run lOnGEr, turn the
s a
pan djust
3. To make your system run SHOrTEr, turn the
s a
pan djust
4. reattach the top cover to the thermostat.
note: The Span range is 0.6
the same in both the Heat and Cool modes and can be
changed regardless of what position the System Switch is in.
o
F above and below the Set
left or right to change the cycle time.
clockwise.
counter clockwise.
o o
F - 3 F. The Span setting remains
24