Animal Weighing Function - KERN CB Operating Instruction

7.11 Animal weighing function

The animal weighing function can be applied for busy weighings. This setting finds
out an average weighing value over a defined period of time.
In the menu the time can be set which is necessary to find out the average value.
Proceed as follows:
Switch-on the balance using the
Press the key and keep it pressed until „UNIT" appears on the display.
Press the key eight times, in the display appears „ANL".
Confirm by pressing the
following settings:
Display
„ANL" 3
„ANL" 5
„ANL" 10
„ANL" 15
„ANL" Off
Use the key to confirm the selected setting.
Operation:
Switch-on the balance using the ON key and wait for the „0" display.
Put the weighing good (animal) on the weighing plate and press the
display the preselected time is displayed in seconds and then is counted towards
zero. During this time the balance takes up several measuring values. When
reaching „0" sounds an acoustic signal and the calculated weighing value is
displayed.
By pressing the
mode.
Repeated pressing of the
20
key and wait for the „0" display.
key. Use the
Adjustment
Average value found out after 3 seconds
Average value found out after 5 seconds
Average value found out after 10 seconds
Average value found out after 15 seconds
Animal weighing not active
key several times, the balance returns to the normal weighing
key activates this function anew.
key to choose between the
CB/FCB-BA-e-0640
key. In the