Information On Disposal For Business Users; Installation; Information On Disposal For Users (Private Households) - Sharp UD-P16E-W User Manual

• Clean the exterior with a soft cloth only. Do not use volatile fluids or de-
tergents. The product surface may be damaged or cracked with Benzine
paint thinner, alcohol or polishing powder.
• Do not get or lean on the product.
Locating the Unit
Avoid locations where furniture, fabrics, or other objects can come in
contact with the product and interfere with the Air Inlet and Air Outlet.
Avoid locations where the product is exposed to condensation or drastic
changes in temperature. Appropriate room temperature is between
0 °C to 35 °C.
Place the product on a level and stable surface with sufficient air
circulation. Place the product in the centre of the room for better air
circulation. When placed on heavy carpet, the product may vibrate slightly.
Avoid locations with grease, oil smoke, alcohol, hypochlorous acid, or
chemicals in the air. Doing so can cause the product exterior to crack.
The surrounding walls and floor of the product may become dirty over
time. When using the product for an extended period of time at the same
location, periodically clean the walls and floor adjacent to it.
Attention:
Your product is marked with this symbol. It means that used
electrical and electronic products should not be mixed with
general household waste.
There is a separate collection system for these products.
Information on Disposal for Users
(private households)
In the European Union
IF YOU WISH TO DISPOSE OF THIS EQUIPMENT, DO NOT USE THE ORDINARY
WASTE BIN, AND DO NOT PUT THEM INTO A FIREPLACE!
Used electrical and electronic equipment should always be collected and
treated SEPARATELY in accordance with local law.
Separate collection promotes an environment-friendly treatment, recycling
of materials, and minimizing final disposal of waste. IMPROPER DISPOSAL
can be harmful to human health and the environment due to certain
substances! Take USED EQUIPMENT to a local, usually municipal, collection
facility, where available.
If in doubt about disposal, contact your local authorities or dealer and ask
for the correct method of disposal.
ONLY FOR USERS IN THE EUROPEAN UNION, AND SOME OTHER
COUNTRIES; FOR INSTANCE NORWAY AND SWITZERLAND: Your
participation in separate collection is requested by law.
The symbol shown above appears on electrical and electronic equipment
(or the packaging) to remind the users of this.
Users from PRIVATE HOUSEHOLDS are requested to use existing return
facilities for used equipment. Return is free of charge.
If the equipment has been used for BUSINESS PURPOSES, please contact
your SHARP dealer who will inform you about take-back. You might be
charged for the costs arising from take-back. Small equipment (and small
quantities) might be taken back by your local collection facility. For Spain:
Please contact the established collection system or your local authority for
take-back of your used products.
In other Countries outside the EU
If you wish to discard this product, please contact your local authorities
and ask for the correct method of disposal.
For Switzerland: Used electrical or electronic equipment can be returned
free of charge to the dealer, even if you don't purchase a new product.
Further collection facilities are listed on the homepage of www.swico.ch
or www.sens.ch.
Information on Disposal for Business
Users.
In the European Union
If the product is used for business purposes and you want to discard it:
Please contact your SHARP dealer who will inform you about the take-back
of the product. You might be charged for the costs arising from take-back
and recycling. Small products (and small amounts) might be taken back by
your local collection facilities.
For Spain: Please contact the established collection system or your local
authority for take-back of your used products.
In other Countries outside the EU
If you wish to discard of this product, please contact your local authorities
and ask for the correct method of disposal.
Flammable material. This appliance contains R290/
Propane a flammable refrigerant. Do not attempt to
re-gas the appliance. Do not release refrigerant to the
atmosphere.

Installation

BEFORE FIRST USE Let the machine stand for 4 hours as this will allow the
refrigerant to settle.
1. Your dehumidifier must be operated in an enclosed area to be most
effective.
2. Close all doors, windows, and other outside openings to the room. The
effectiveness of the dehumidifier depends on the rate at which new
moisture-laden air enters the room.
3. Place dehumidifier in a location that does not restrict airflow through
the front of the unit.
4. A dehumidifier operating in a room will have little or no effect in drying
an adjacent enclosed storage area, such as a closet, unless there is
adequate circulation of air in and out of the area. let may be necessary
to install a second dehumidifier in the enclosed area for satisfactory
drying.
5. Ensure that the unit is placed on a stable and flat surface. If the surface
is not stable there is a risk that the unit may be unstable and cause
excessive vibration and that water will be released.
6. The dehumidifier must have at least 20 cm free space around it.
Refer to the 1 on page 1.
EN