Table of Contents
Advertisement
Power On/Standby
• To switch the unit on, press briefly the function knob.
- When switched on, the unit switches to the last selected source and the button
backlights are illuminated.
• To switch the unit to standby, press and hold the function knob.
- When switched to standby, clock is displayed and the button backlights are off.
Set Clock
1.
In power on mode, press and hold SEL to display the preference setup options.
2.
When the setup option is displayed, press briefly and repeatedly SEL until the "Time"
option is displayed. Set the hour and minutes as follows.
a.
When hour digits are highlighted, rotate the function knob to set the hour.
b.
Press SEL to confirm. Minute digits are highlighted.
c.
When minute digits are highlighted, rotate the function knob to set the minute.
d.
Press SEL to confirm.
3.
When 12/24 hour format option is displayed, rotate the function knob to select 12 or 24
hour format. After three seconds of button inactivity, the setup automatically exits and
the clock is set.
Adjust/Mute Volume
• To increase or decrease volume, rotate the function knob.
• To mute or restore volume, press briefly the function knob.
Reset The Unit
If the unit fails to operate properly, reset the unit. After resetting, all the settings will restore
to the default.
1.
In power on mode, press and hold SEL to display the preference setup options.
2.
When the setup option is displayed, press briefly and repeatedly SEL until the "RESET"
option is displayed.
3.
Press the function knob to confirm the reset option. After resetting, the unit will
automatically switch to standby.
7
Advertisement
Table of Contents
