Important - Boss Audio Systems MGV500B User Manual

Important

Read and understand all instructions before you use your product. If you do not
follow the instructions in this manual, we are not responsible for injury or damage
resulting from improper handling. This will also void the warranty.
Important safety precautions
• Be sure to observe the following guidelines:
- Do not increase speaker volume so high that you cannot hear what is around you.
- Use caution or temporarily discontinue use in potentially hazardous situations.
• Do not operate mobile video equipment while driving a motorized vehicle – safe driving
and safety consideration of others should always be your highest priority.
• Start volume at a low setting then gradually increase the volume until you can hear it
comfortably, without sound distortion or ear discomfort.
• In the event of smoke, strange noise or odor emitted from the product or any other
abnormal operational signs appearing on the product, disconnect the product from the
power supply. Discontinue use and contact your dealer or our technical support. Using
the product in this condition may result in permanent damage to the system.
• Servicing must only be carried out by a technician. Contact our technical support for
any service question.
Installation precautions
• WARNING: Always consult a professional installer.
• Installation must be performed by a professional. Contact our technical support for any
installation question.
• Use only installation parts provided with the product.
• Before installation, disconnect the negative terminal of the vehicle battery to prevent
damage to the product, fire, and/or possible injury.
• If extending the power cable which connects to the vehicle battery, we recommend to
run the extended cable to the battery through a fuse box (not included) with at least 15A.
• Ground cable should be as short as possible. Connect the ground cable to metal parts
of your vehicle, or to the battery if your vehicle does not have a grounded chassis frame.
Make sure the metal surface to which the ground cable connects is scraped clean from
rust and dirt. The ground cable must be firmly fastened with a screw or bolt. If extending
the ground cable, make sure to use a high quality cable with proper gauge rating.
• Replace the old fuse with the new one of the same rating.
2