AEG IPE84571FB User Manual page 36

separately. Use two left side control bars.
Correct cookware position:
To use this mode you have to place the
cookware on the three connected sections. If
you use cookware smaller than two sections
the control bar blinks and after 2 minutes the
zone switches off.
Incorrect cookware position:
6.4 FlexiBridge Max Bridge mode
To activate the mode touch
the correct mode indicator
connects all sections into one cooking zone.
To set the heat setting use any of the two
control bars on the left side.
36 ENGLISH
until you see
. This mode
Correct cookware position:
To use this mode you have to place the
cookware on the four connected sections. If
you use cookware smaller than three
sections the control bar blinks and after 2
minutes the zone switches off.
Incorrect cookware position:
6.5 PowerSlide
This function allows you to adjust the
temperature by moving the cookware to a
different position on the induction cooking
area.
The function divides the induction cooking
area into three areas with different heat
settings. The hob detects the position of the
cookware and adjust the heat setting