ATTACK 810 Series Operation Manual page 24

WARNING: WHEN THE GOODS ARE IN A LIFTING STATE, THE LOADER CAN NOT TURN
Multi-way valve focus controlling lifting devices and tools :
(Note: The Multi-valve had auto-lock function, it needs to pull out the main control level in working
condition, to release the lock function; and press the main control level when it does not working.)
Locking tools - push the back of a small handle to the right.
Releasing tools - push the back of a small handle to the left.
Skips forward – push the master-control lever to the right.
Skips backward – push the master-control lever to the left.
Lifting skips – push the master-control lever to the back.
Lowering skips – push the master-control lever to the front.
Changing attachment:
1) Push the small multi-valve handle to left side, indent the lock level;
2) Down the attachment, forward to the appropriate location;
3) Hang the hook;
4) Lift and backward the attachment;
5) Push the small multi-valve handle to right side, reach out the lock level, insert the assemble
hole under attachment;
6) Turn two triplex valve handle to 90°, cut the lock cylinder pipe system.
Remove the attachment:
The step is reversing as changing attachment step.
WARNING: LIFTING DEVICES AND TOOLS ARE ONLY USED FOR A SPECIFIED
PURPOSE.DRIVERS MUST COMPLY WITH THE "CORRECT AND USE THE LIFTING DEVICES
AND TOOLS".DO NOT ENTER OR REACH INTO THE SPACE BETWEEN THE ARM AND THE
WARNING: BEFORE THE OPERATION OF HYDRAULIC SYSTEMS, CHECK IF THE
WARNING: NOTE THAT THE SIGN OF THE OPERATION MARKED WITH THE DIRECTION OF
Page 24/57
810,820 Series wheel loader operation manual
AROUND AND CAN NOT RUN AT HIGH SPEED.
FUNCTIONS OF THE VARIOUS HYDRAULIC JOYSTICKS ARE CORRECT.
THE ARROW SYMBOLS.
FRAME.
Wheel loader
JST
Series
Updated 8/27/2013