Unit Conversion Table; Optional Accessories - Jadever JWI600 User Manual

Put the cable of Load Cell through (3) lower support, insert (3) lower support into
(2) upright pole and tighten (7) screw.
Put the cable of Load Cell through (4) upper support and connect (5) display unit,
then insert (4) upper support into the (9) upper support slot. [Be sure to put the
cable outside the upper support].
Put the cable of Load Cell into (10) channel, assemble (3) lower support and (4)
upper support, lock the (4) upper support and (3) lower support with (8) stud
after the holes are aligned.
Adjust the (5) display unit to the desired angle, insert the (11) pin into the
positioning hole of (4) upper support and (3) lower support. Then the installation
is completed.
*Use (11) pin to regulate the angle of display unit and use (7) screw to regulate
the direction of display unit.

2. Unit Conversion Table

1 t =1000kg =1000000g
1 Jin = 500g
1 HK Liang = 37.799375g
1 Taiwan Liang = 37.49995g

3. Optional Accessories

Option Accessories List
Optional Fittings
RS232 +RTC
PC
RS232 +RTC
BP5
45
RS232 +RTC
SH-
24
PAGE
32
External Device
＋
PC
＋
TDP(BP545)
＋
1 lb = 453.59237g
1 HK Jin=16 HK Liang
1 Taiwan Jin=16 Taiwan Liang
Output Format
T.W. : + 2.375 kg
N.W. : + 2.375 kg
G.W. : + 4.750 kg
→
→
T.W.:
+0.0000 kg
N.W.:
→
+1.6025 kg
G.W.:
+1.6025 kg
JADEVER
http:www.jadever.com.tw