Table of Contents
Advertisement
Hold on SET and power on the scale. Enter the
1
setting mode, the screen appears as right side
picture.
2
Press SET
Press
3
please set "ON" to enable the RTC function.
Press ZERO
4
to weighing mode.
■Time Setting
STEP DESCRIPTION
1
In weighing mode, hold on
2
Circularly press
month and time.
Shift to the portion expected to be revised, press
3
to circularly select the revised digit, the selected
digit will flash. Press
4
Press
return to weighing mode.
8-2. Option Output:
8-2-1 Printer output:
2.1.1 Parameter Setting:
Step Description
1
Press the key
press and hold down the
key
to enter into the setting
mode, release the key
until the screen displays
CAL.
PAGE
26
to shift to RTC setting mode.
TARE
to circularly set "ON" or "OFF",
to quit the setting mode and return
key to shift to choose year,
to save your setup.
after
, release the key
for three seconds.
+
to change the value.
Press
Screen display
DISPLAY
to
JADEVER
http:www.jadever.com.tw
Advertisement
Table of Contents
