Table of Contents
Advertisement
Err8
The setting of used unit does not conform to
power-on unit. (only % and PCS are set "on" for
used unit)
Err9
The set LOW value exceeds or equals to the HI
value.
Err 11
Wrong time and date setting
OVER
Exceed maximum accumulation times (max. 99)
Battery
Battery power almost runs out.
symbol
If external interface is required, please select the optional RS
☆
first, which integrates RS-232 & RTC (time and date record) functional module
onto one circuit board, so only this board can ensure the two functions can be
realized.
8-1. RS-232+RTC board output pin
RTC Function Setting
Step Description
PAGE
25
Part VIII External Interface
avoid such
occurrence in the
future, otherwise
the scale may be
damaged.
At least one unit
should be
enabled (besides
% and PCS)
Make LOW value
lower than HI
No more
accumulation.
Replace the
battery or use AC
power supply
(transformer)
-232+RTC board
Display
JADEVER
http:www.jadever.com.tw
value.
Reset
Advertisement
Table of Contents
