Engagi Ng The Fli P Down Fence - RIDGID R4550 Operator's Manual

ENGAGI NG THE FLI P DOWN
FENCE
When working with large pieces of material that extend beyond
the table surface flip the work piece support towards the blade
side of the table to provide proper support.
1.
Locate work piece support on right side of fence.
2.
Push up on Flip Fence and flip over t op of Fence and
toward the blade side of Fence.
3.
Slide workpiece support into place on left side of fence
until it is in line with the table.
See Figure 46 also Figure 63.
MAKI NG ADJUSTMENTS
27
Figure 46