Advertisement
These risks can arise from misuse, pro-
longed use etc. Even with the application
of the relevant safety regulations and the
implementation of safety devices, certain
residual risks can not be avoided.
These include:
Injuries caused by touching any mov-
u
ing parts.
he
Injuries caused by touching any hot
u
parts.
Injuries caused when changing any
u
d-
parts or accessories.
Injuries caused by prolonged use of
u
the appliance. When using any appli-
ance for prolonged periods ensure you
take regular breaks.
or
es
Electrical safety
The appliance is designed for use with
12V negative ground vehicle battery
s
systems.
Warning! The cigarette lighter connec-
s
tor is fi tted with a non-serviceable safety
d
fuse. The fuse may operate in the event
of a fault. If this occurs the fuse must be
replaced together with the connector and
cable by the manufacturer or an author-
ised Black and Decker Service Centre in
order to avoid a hazard.
n
Warning! Do not operate the appliance
with systems which have positive ground
or a different voltage.
Features
n
This appliance includes some or all of the following features.
d
1. On / Off switch
2. Removable handle
3. Handle release ring
4. Hose
5. Transparent door
6. Cigarette lighter connector
7. Door latch
8. Bowl release button
9. Removable dust bowl
10. Accessory clip
11. 2-in-1 combi nozzle accessory
12. Crevice tool.
13. Flexible crevice tool
14. Pet hair tool
15. Accessory bag
Assembly
Mounting accessories (fi g. B, C, D, E,
F & G)
The 2-in-1 combi nozzle (11) has a brush that can be folded
forward for dusting and upholstery cleaning
To fi t an accessory press the accessory clip (10) and slide
u
the accessory onto the handle (2) (Fig. B & C).
To remove an accessory, press the accessory clip (10)
u
and remove the accessory.
The handle (2) can be removed from the hose (4) allowing
the accessories to be connected directly to the hose when
required. To remove the handle:
Unclip the handle (2) from the appliance.
u
Rotate the locking ring (3) anti-clockwise to release the
u
clips (Fig. D).
Pull the hose (4) away from the handle (2) (Fig. E).
u
Fit the accessory directly to the hose cuff (3) (Fig. F)
u
To refi t the handle:
Remove the accessory from the hose.
u
Push the hose (4) into the handle (2). Rotate the locking
u
ring (3) clockwise until it clicks into place
Use
Connecting to the vehicle's power
supply
Make sure that the appliance is switched off.
u
Remove the cigarette lighter from it's socket.
u
Plug the connector (6) into the cigarette lighter socket.
u
Switching on and off (fi g. A)
To switch on, slide the on/off switch (1) to the right.
u
To switch off, slide the on/off switch (1) to the left until it
u
clicks into the off position.
The appliance can be used for periods of up to 30 minutes
without noticeably affecting the power of a normally charged
car battery in good condition.
ENGLISH
ENGLISH
7
7
Advertisement
