Table of Contents
Advertisement
Quick Links
POWERSWIVEL™ UPRIGHT VACUUM
CLEANER
INSTRUCTION MANUAL
MODEL NUMBER
BDPSC101
BDPSC102
BDPSC103
BDPSC104
BDPSC105
BDPSC106
Thank you for choosing BLACK+DECKER!
PLEASE READ BEFORE RETURNING THIS PRODUCT FOR
ANY REASON.
If you have a question or experience a problem with your BLACK+DECKER
purchase, call 1-800-524-6716 from 9 a.m. to 5 p.m. EST Mon. - Fri. to speak
with an agent.
Please have the model number available when you call.
SAVE THIS MANUAL FOR FUTURE REFERENCE.
To register your new product, visit
www.BlackandDecker.com
Advertisement
Table of Contents
Related Manuals for Black & Decker BDPSC101
Summary of Contents for Black & Decker BDPSC101
- Page 1 POWERSWIVEL™ UPRIGHT VACUUM CLEANER INSTRUCTION MANUAL MODEL NUMBER BDPSC101 BDPSC102 BDPSC103 BDPSC104 BDPSC105 BDPSC106 Thank you for choosing BLACK+DECKER! PLEASE READ BEFORE RETURNING THIS PRODUCT FOR ANY REASON. If you have a question or experience a problem with your BLACK+DECKER purchase, call 1-800-524-6716 from 9 a.m.
-
Page 2: Important Safety Instruction
IMPORTANT SAFETY INSTRUCTION SAFETY GUIDELINES - DEFINITIONS It is important for you to read and understand this manual. The information it contains relates to protecting YOUR SAFETY and PREVENTING PROBLEMS. The symbols below are used to help you recognize this information. DANGER: Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury. - Page 3 DO NOT use the vacuum cleaner with power supply when not in use, before blocked filters. Clean or replace filters changing the filters, cleaning the filters or before continuing. (refer to User connecting / disconnecting the Maintenance section). accessories. DO NOT use the vacuum cleaner if the DO use only on dry, indoor surfaces.
-
Page 4: Transporting Your Vacuum
IMPORTANT SAFETY INSTRUCTION CONT. READ AND SAVE THESE INSTRUCTIONS Symbols • The label on your tool may include the following symbols. The symbols and their definitions are as follows: V ....volts A .....amperes Hz ....hertz W ....watts min ....minutes or AC ..alternating current or DC ..direct current n o ....no load speed ....Class I Construction... -
Page 5: Product View
Product View 1. On board pet tool 8. Power cord 2. Dust cup clamp 9. Power cord wrap 3. Dust cup assembly 10. Hose holder 4. Air outlet 11. Handle hose 5. Power on/off 12. Tool holder 6. Wheel 13. Handle 7. - Page 6 Assembly Please Note: Always remove the plug from the power socket before fitting or removing accessories. Ensure all Filters are fitted, and fitted correctly before using. WARNING: DO NOT plug in your vacuum cleaner until you have completely assembled it per the following instructions and are familiar with all instructions and operation procedures.
-
Page 7: Operation
Assembly Install the Pet Tool Holder by aligning one Place the Pet Tool on the Pet Tool Holder side of the holder with the guides. Once by aligning the bottom hook with the Pet the guides are aligned in the guide slot, Tool and then pressing the Pet Tool hose press until the other side locks into place. - Page 8 Operation HARD HIGH FLOOR Plug in your machine and push ON/OFF The unit has five height adjust for different button to switch on. ground, for example hard floor, low carpet, high carpet and so on. When adjusting the height of the unit, the machine is in the upright position.
- Page 9 Operation Don’t over fill the dust cup. Overfilling the dust cup can clog your filter. Accessories 3-in-1 Crevice Tool Accessory The 3-in-1 accessory/crevice tool allows for vacuuming in narrow and hard-to-reach places. TURBO Pet Tool For vacuuming pet hair off of all surfaces.
- Page 10 Maintenance And Care - Emptying WARNING: Turn off and unplug vacuum cleaner before performing maintenance to the vacuum cleaner. Emptying and cleaning the dust cup Press dust cup release Hold dust cup over garbage bin and unclip Close the base of the button to remove the the lock on the bottom of the cup, allowing the dust cup, align the cup...
- Page 11 Maintenance And Care - Cleaning Dust Cup Filter WARNING: Turn off and unplug vacuum cleaner before performing maintenance to the vacuum cleaner. 2. Open the dust cup 3. Remove the dust 1. Remove the dust cup. filter lid, located on the cup foam filter.
- Page 12 Maintenance And Care - Cleaning Dust Cyclone WARNING: Turn off and unplug vacuum cleaner before performing maintenance to the vacuum cleaner. 2. Wash with water when needed. Dry for at 1. Remove the dust cyclone. least 24 hours before re-using. Maintenance And Care - Cleaning Vacuum And Tools WARNING: Turn off and unplug vacuum cleaner before performing...
- Page 13 Maintenance And Care - Cleaning Vacuum And Tools Do not clean the vacuum cleaner, components or accessories using petrol or any other flammable liquid or solvents, etc. Clean only the outside of the vacuum cleaner. Use only a moist cloth and mild detergent for cleaning the vacuum cleaner, components and accessories.
- Page 14 Maintenance And Care - Replace Brush Roll WARNING: Turn off and unplug vacuum cleaner before performing maintenance to the vacuum cleaner. You should check your cleaner’s brush roll and drive belt regularly for wear or damage. You should also clean the brush and brush ends by removing string, hair and carpet fibers.
- Page 15 Maintenance And Care - Replace Drive Belt WARNING: Turn off and unplug vacuum cleaner before performing maintenance to the vacuum cleaner. Check the drive belt carefully for wear, cuts and stressed areas. If the drive belt appears worn, you will need to replace it. To remove the drive belt, read the instructions and follow the drawings below: 1.
-
Page 16: Troubleshooting
Troubleshooting WARNING: To reduce the risk of electric shock, turn power OFF and disconnect plug from electrical outlet before performing maintenance or troubleshooting to the vacuum cleaner. Vacuum cleaner won’t run: Possible causes Remedies 1. Vacuum cleaner is not plugged in 1. -
Page 17: One-Year Limited Warranty
WARRANTY ONE-YEAR LIMITED exchanges. WARRANTY The second option is to take or send the Black & Decker (U.S.) Inc. warranties product (prepaid) to a BLACK+DECKER this product to be free from defects in authorized service agent for repair or material or workmanship for a period of replacement at BLACK+DECKER’s option.