Frequently Asked Questions - Panasonic KX-TGF975 Quick Manual

Frequently asked questions

Question
Why is _ displayed?
Why am I unable to pair a
cellular phone to the base
unit?
Why is there no dial tone?
(cellular line)
How can I increase the
handset volume level?
Why is the conversation
noisy or cutting off?
Can I add another
accessory handset to my
base unit?
Can I keep the batteries
charging all the time?
How can I answer a call
waiting call (2nd call)?
Cause/solution
L The handset is too far from the base unit. Move closer.
L The base unit's AC adaptor is not properly connected. Reconnect
AC adaptor to the base unit.
L The handset is not registered to the base unit. Register it.
1
Handset: {MENU}(13)
2
Base unit: Press and hold {LOCATOR} for about 5 seconds.
3
Handset: Press {OK}, then wait until a long beep sounds.
L Depending on the compatibility of the cellular phone, you may not be
able to pair it to the base unit. For more information, please visit
http://shop.panasonic.com/bluetooth-phone
L Confirm that the Bluetooth feature of your cellular phone is turned
on. You may need to turn this feature on depending on your
cellular phone.
L The cellular phone has not been paired to the base unit. Pair the
cellular phone.
L Press the volume key {^} repeatedly while talking.
L Try to relocate the base unit so that distance to the handset is
minimized.
L If the same problem occurs even if the handset is next to the base unit,
please visit: http://shop.panasonic.com/support
L Yes, you can add up to 6 handsets (including the handset(s) sold
with your base unit) to a single base unit.
L To purchase additional accessory handset(s) (KX-TGFA97),
please visit: http://shop.panasonic.com/support
TTY users (hearing or speech impaired users) can call 1-877-833-
8855.
L You can leave the handset on the base unit or charger anytime.
This will not harm the batteries.
L Press {FLASH} on the handset or {CALL WAIT} on the base unit
when you hear the call waiting tone.
– 11 –