Panasonic KX-TG8220FX Quick Manual page 7

All manuals and user guides at all-guides.com
TG8200_8220FX(e-e)_QG.fm Page 7 Monday, July 9, 2007 7:18 PM
Frequently asked questions
Question Cause & solution
Can I keep the handset on L Even after the handset is fully charged, the
the base unit or charger
when I am not using it?
When should I replace the L If the batteries are fully charged until & is
batteries?
What is a PIN? L The PIN is a 4-digit number that must be entered
What do I need to do to L You need to subscribe to Caller ID service.
display caller information?
L The message "You must first subscribe
What should I do when: L Place the handset and the base unit away from
– I hear static or sound cuts
in and out?
L Move closer to the base unit.
– there is interference from
L Your unit is connected to a telephone line with
other electrical units?
What should I do when the L Wipe the battery ends (S, T) and the unit
operating time seems to be
short even after I fully
charged the batteries?
What do I need to do to L There are unviewed missed calls remaining. View
erase W (Missed call) from
the display?
handset can be left on the base unit or charger
without any ill effect on the batteries.
displayed, but ) is displayed after a few calls,
replace the batteries with new ones.
in order to change certain base unit settings. The
default PIN is "0000".
Consult your service provider/telephone company
for details.
to Caller ID." will be displayed until you
receive caller information after subscribing to
Caller ID service.
other electrical appliances.
DSL service. We recommend connecting a filter
(contact your DSL service provider) to the
telephone line between the base unit and the
telephone line jack.
contacts with a dry cloth.
them using the following method.
1
" (centre of joystick) i j i #
2
Push the joystick down to search from the most
recent call, or push the joystick up to search
from the oldest call.
– 7 –