Table of Contents
Advertisement
3.
ASSEMBLY INSTRUCTIONS
This section tells you how to correctly set up your digital piano. For
assembly you will need:
A size 2 phillips screwdriver
Another person
Do not tighten the Philips screws until all parts of your digital piano have
been pre-assembled and aligned.
How to assemble your digital piano:
1. Unfold the pedal cable (not shown) and screw the adjustment screw
(10) into the pedal board (3).
2. Connect the side panels (4 and 5) with the pedal board using the Philips
screw (7b).
3. Attach the rear panel (2) with the 4 Phillips wood screws (8a) to the
pedal board. Then connect it to the side panels by using the Philips
screws (8b).
4. Then you can place the keyboard on the top. Ensure that it is fitted to
the metal angle of the side panels. 4 Phillips screws (7a) must be
screwed into the keyboard from below.
5. Then align your digital piano and tighten all of the screws.
6. Place you piano at the desired location and make sure that the
adjustment screw (10) touches the floor as shown below.
DP345
Advertisement
Table of Contents
