Assembly And Adjustments - Skil 3540 Owner's Manual

ASSEMBLY AND ADJUSTMENTS

WARNING
reduce the risk of starting the tool accidentally.
Tile Blade Installation
WARNING
blade larger or smaller than 7" diamter, do
not use tile blade with speed rating less
than 3600 RPM. Only use smooth edge tile
blade free of openings and grooves.
1. Remove the lower guard: use a number 2
screwdriver (not provided) to loosen the two
securing screws (Fig. 1)
2. Holding the tile saw blade firmly by hand,
use the wrench to loosen the nut in a
counterclockwise direction (Fig. 2).
3. Remove outer flange and the tile blade.
Reserve the outer flange.
4. Ensure that the shaft and both inner and
outer flanges are clean.
5. Ensure that the inner flange is in place and
is centered on the shaft.
6. Ensure that the directional arrow marked
on the new tile blade is counterclockwise
around the shaft. (Fig. 3).
16
Disconnect the plug from the power source before making any
adjustments or changing accessories. Such preventive safety measures
To reduce the risk of
injury, do not use tile
Fig. 1
Lower Guard
Screw
Fig. 2
Install
Fig. 3
Tile Blade Nut
Outer
Flange
Tile Blade Direction
Screw
Remove
Wrench
Shaft