Reset; Meter Button/Charging Function; Light; Band Button - DIGITECH Audio AR-1733 Owner's Manual

You press the button in the first time, the "PAGE" icon will flash for about
5 seconds. You can select 0~9 pages with 0~9 keys during this period.
Then press 0~9 keys to enter the channel number of a station you memorized.
If there is not any operation,the "PAGE" will turn off automatically after flashing for 5
seconds.


RESET

The Reset hole locates on bottom of unit,you can use toothpick to
press the button to reset the radio.


METER Button/Charging Function

While the radio is on,quickly press the button to increase frequency as
the following steps:
FM/AIR at 1MHz step
MW at 100kHz step
LW at 10kHz step
In SW mode, pressing the "METER" button changes meter band.
Press and hold the button for three seconds in AIR band to activate
air squelch function.
While the radio is off, press the button to activate rechargeable battery
Charging. (See "Technical Specification" page about Charging Notes)


LIGHT

Pressing any button will give you about 5 seconds of light on the display.


BAND Button

Quickly pressing the button with the radio "on" changes bands in order:FM,LW,
MW,SW and AIR.
The "BAND" button can be pressed and held for 3 seconds to search
station from low end to high end frequency and memorize station automatically.
You will see channel number changes automatically as soon as one strong
station is searched.
12