Up And Down Buttons; Am Bw Button; Page Button/Setting The Alarm - DIGITECH Audio AR-1733 Owner's Manual

in the LCD; press and hold down this button for three seconds to unlock all
buttons,the lock icon

UP and DOWN Button
These buttons can be used to tune the radio one step at a time
or "press and hold" to scan for the next strong station.
While the radio is on, quickly press the button to increase or de-
crease frequency at the following steps:
FM at 100kHz step
LW at 3kHz step
AM at 9kHz step (in 9kHz mode)/10kHz step (in10kHz mode)
SW/AIR at 5kHz step
Press and hold "UP" or "DOWN" button to auto-scan strong stations,once found
one and stop scanning.

AM BW (i.e. AM BANDWIDTH) Button
While the radio is off, press and hold the button for three seconds to change
between 12 hour and 24 hour format.
While the radio is on,
In FM band, press the button to change between mono and stereo.
Note:
While the Stereo is on, the stereo icon will be displayed for 3 seconcs
While the Stereo is off, the stereo icon flashes for 3 seconds
In MW/SW/LW/AIR band, press the button to change between wide
bandwidth and narrow bandwidth.


PAGE Button/Setting The Alarm

Quickly pressing the button with the radio "off" changes to display Alarm
and Clock time.
Press and hold the button for 3 seconds with the radio "off":
1) If Alarm function is off, enter alarm setting and activate alarm function;
Using (0-9) number keys only to enter alarm time you desired.
2) If Alarm function is on, turn off alarm, the Alarm cannot be set.
(Note:The radio will alarm on the last station listened to.)
While the radio is on,quickly pressing the button changes Page (0~9)
will disappear.
11