HP MediaSmart SLC3760N User Manual page 69

Setting a secret number
In the Setup menu, select Parental CTRL, Secret
No., and then enter the new 4-digit secret number by
using the 0–9 buttons on the remote control. Enter the
same digits for Reconfirm, and then press OK.
!
IMPORTANT: As a precautionary measure,
write down your secret number.
Setting parental control status
Status is used to enable or disable the parental control
function. Select On to enable and Off to disable
parental control.
!
IMPORTANT: If the TV is forced-tuned to a
channel that has been blocked by parental
control, the Parental Control setting is
given priority, and the EAS message is not
broadcast.
Changing the secret number
New Secret No. in the Secret No. menu allows you to
change your current secret number.
Clearing the secret number
Secret No. Clear in the Secret No. menu allows you to
clear your secret number.
n
If you lose or forget your secret number,
use these steps to clear the secret number:
a Press Setup on the remote control to open the
OSD.
b Press the up or down arrow buttons to select
Setup. Press OK.
c Press the up or down arrow buttons to select
Parental CTRL, and then press OK. (You can
select EZ Setup, CH Setup, or Reset
instead of Parental CTRL.) The Secret No.
window displays.
d On the top of the TV, press and hold at the
same time both the CH^ (Channel Up) and
VOL+ (Volume Up) buttons until a message
appears on the screen.
If the secret number is cleared, the Status
setting automatically sets to Off. V-Chip
and Status are not selectable from
the menu.
Changing the TV Settings
57