Using The Picture Menu; Adjusting The Picture Settings - HP MediaSmart SLC3760N User Manual

Using the Picture Menu

The Picture menu controls the look of the image on the
screen for the selected picture mode. For example,
when you adjust Brightness, the screen image changes
as you adjust the scale.
Because the Picture menu maintains settings for each
input, select (view) the input source, and then make
Picture menu changes. The following table shows the
Picture menu.
Picture menu
OPC (optical
picture control)
Backlight
Contrast
Brightness
Color
Tint
Sharpness
Advanced
Reset
Make sure no object obstructs the OPC
sensor, which could affect its ability to
sense surrounding light.
50
HP MediaSmart HDTV User's Guide
Options
Off/On/On:Display
[scale]
[scale]
[scale]
[scale]
[scale]
[scale]
Color Temp
■
Black
■
3D-Y/C
■
Monochrome
■
Film Mode
■
Range of OPC
■
No/Yes
n

Adjusting the picture settings

Setting OPC
The optical picture control (OPC) adjusts the overall
brightness of the screen.
With OPC set to Off, the brightness is fixed at the
value set in Backlight. With OPC set to On or
On:Display, the OPC sensor on the front of the TV
senses the surrounding light and automatically adjusts
the backlight brightness. On:Display also causes a
label to appear on the screen while the OPC is
adjusting the screen brightness.
Adjusting the image
These settings adjust the image you are watching, so
select the correct input source before adjusting values.
Backlight sets the overall screen brightness
■
when OPC is off.
Contrast sets the image contrast.
■
Brightness sets the image brightness.
■
Color sets the image color intensity.
■
Tint sets tones; decrease to make skin tones more
■
purple, or increase to make skin tones more
green.
Sharpness sets the image sharpness.
■
Advanced are individual settings; see the
■
following section.
Adjusting Advanced settings
The Advanced options depend on the input source.
Color Temp sets the white balance in increments
■
from High to Low; choose High for white with blue
tones and Low for white with red tones.
Black sets the viewing depth automatically by
■
adjusting the dark portion of an image; set to On
for high detail in black portions of the image.
3D-Y/C sets the response for minimal dot crawl
■
and cross-color noise for video input signals from
Composite Video or Analog In. Select Standard
for normal adjustment, Fast for a movie image, or
Slow for a still image.
Monochrome sets color to monochrome for
■
viewing video without color. Set to On for
monochrome.