Using Parental Ctrl; Setting Input Skip; Setting Position; Setting Input Label - HP MediaSmart SLC3760N User Manual

Using the Channel Strength option
1
With the Antenna set (refer to "Setting the antenna
using the Air/Cable option" on page 52 in the
previous topic), view the air digital channel on the
TV.
2
Press Setup on the remote control, and select
Channel Strength in the Setup/Antenna Setup
– Digital menu. Press OK.
3
Move or adjust the direction of the air digital
antenna until you obtain the maximum signal
strength. Press OK.

Using Parental CTRL

This option defines settings for parental control,
including setting the secret number (Secret No.); refer
to "Using Parental Controls" on page 56.

Setting Input Skip

This option sets the TV to skip the HDMI connectors
(Input 4 or MediaSmart) when selecting the input
source.

Setting Position

Use this Setup menu option to position the image on
the screen by setting horizontal and vertical values.
Settings depend on the input source; this option is for
AV inputs only. Select (view) the input source before
selecting the menu option and adjusting the image
position.

Setting Input Label

This option selects a name (from a list) for the input
source. You cannot change the TV label.

Setting Picture Flip

This Setup option sets the orientation of the picture.
Select (view) the input prior to setting the Picture Flip
mode.
Picture Flip mode
Standard (normal image)
Mirror (mirror image)
Upside Down (upside
down image)
Rotate (rotated image)

Setting Standby Mode

This option sets the TV mode for standby.
Standby Mode may be set to Mode 1, which starts the
TV quickly from standby, or to Mode 2, which
conserves energy while on standby.

Setting Language

This option sets the OSD menu language; select
English, French, or Spanish.
Changing the TV Settings
Example
ABC
C B A
A B C
ABC
53