4.
Screens and Functions
Measurement Screen
4.1
Status LED
Current values
(AW and surface
temperature)
10
•
The current measurement values are displayed as soon as the sensor
is ready to measure
•
The duration of the pre-heating phase depends on the existing humidity
and temperature in the measurement chamber. In general, it takes 2-3
minutes.
3.3.2 Shut-down procedure
To shut-down just press the red shut-down button on the main menu screen.
Confirm the shut-down process with "YES"
Important:
Always shut-down the instrument before you disconnect it from power other-
wise there might be a loss of data and settings.
This chapter describes the main screens which appear on the
display of the LabTouch-aw as well as the function of the symbols.
The measurement screen is displayed after the instrument has started up or
if a measurement has been started.
Stable RESULTS
Information bar
Status of SD card