Maintenance And Troubleshooting; Cleaning Fiber Optic Connectors - Baudcom BD-5800H Operating Manual

The
button, click it the device will auto reboot.
The
login password, click it and enter the interface to change as follows:

6. Maintenance and Troubleshooting

6.1 Cleaning Fiber Optic Connectors

DANGER: The fiber optic connector carries invisible laser radiation
while working, so should avoid charged operation.
Dirty optical connectors are the leading source of poor performance in a broadband
optical fiber network. Dirty optical connectors lead to optical signal loss and
reflections, which in turn can seriously degrade signal-to-noise (SNR) performance
and, in some cases, distortion performance. We recommend that you clean all mating
fiber connectors before connecting them to an optical transmitter.
In addition, if you suspect that the optical connector of equipment may have been
exposed to contamination (by a dirty fiber cable connector, for example), you should
properly clean the optical connector before connecting the optical fiber.
CAUTION: Improper cleaning of an optical connector can do more harm than
good. Never spray a clean-air product onto the surface of an
optical connector. Spraying air onto an optical connector can
cause condensation on the connector surface, leaving water spots
and trapping dust. Failing to wipe a connector on dry lens paper
immediately after wiping on paper wet with isopropyl alcohol
can also lead to condensation on the connector. Using low-grade
cleaning paper or other cloth to wipe an optical connector can
leave microscopic fibers on the optical connector Surface.
Website: www.baudcom.com.cn Tel：+86-21-37709251 Email: info@baudcom.com.cn
1550nm external modulated optical transmitter operating manual
is the change interface of WEB network management
- 23 -
button is the device reboot