Sbs Suppression Adjustment; Installing The The Optical Transmitter; Receiving And Inspecting; Precautions - Baudcom BD-5800H Operating Manual

As the same, 100GHz frequency distance reflects to wavelength is very approximate
to 0.8nm width.

3.4.8 SBS Suppression Adjustment

SBS value is very important in 1550nm long-distance transmission system. Stable
continuous coherent light source, add +6 dBm optical power in the standard single
mode fiber may occur SBS phenomenon. Ultrahigh SBS threshold will reduce CNR
and CSO low-frequency indicators.
High SBS threshold will also influence self phase modulation (SPM) and reduce
high-frequency CSO indicator.
When meet the conditions, as far as possible to use a low threshold SBS.
4. Installing the Optical Transmitter

4.1 Receiving and Inspecting

As you unpack your unit, inspect the shipping container and equipment for damage.
Save the shipping material for future use. If the container or the equipment is
damaged, notify both the freight carrier and us.
CAUTION
:

4.2 Precautions

Heed the following precautions when working with the equipment.
Warning
Attention
Warnung
Warning
Attention
Website: www.baudcom.com.cn Tel：+86-21-37709251 Email: info@baudcom.com.cn
1550nm external modulated optical transmitter operating manual
To protect yourself from potential injury and to protect the
equipment from further damage, do not perform any
operational tests if the equipment appears to be damaged.
Read the installation instructions before connecting the system to
the power source.
Avant de brancher
d'alimentation,consulter les directives d'installation.
Vor dem Anschließen des Systems an die Stromquelle die
Installationsanweisungen lesen.
The plug-socket combination must be accessible at all times,
because it serves as the main disconnecting device.
La combinaison de prise de courant doit être accessible à tout
moment parce qu'elle fait office de système principal de
déconnexion.
- 13 -
le système sur la source