Canon G1000 Series Service Manual page 29

For how to remove Main Tank (COLOR), refer to Procedures for replacing Main Tank (BLACK).
Install main tanks in reverse order of removing the tanks.
NOTE: 1. Check visually whether there is no hole in aluminum film at the side of main tank, or whether the
aluminum film is not torn.
2. Confirm that an ink supply tube is securely inserted.
If not, insert it securely.
3. Confirm that the ink absorber of the bottom frame is located correctly.
If it is misaligned, position it correctly.
(16) Removing the Main PCB Ass'y
1) Disconnect all the cables and FFCs from the main PCB ass'y.
OK
OK
NG (not inserted securely)
NG (misaligned)
(29/80)
easyfixs.blogspot.com
QY8-13EX-040