Local Oscillator Frequency; Downstream Frequency - Test Equipment Depot XFTP SAT LITE Operation Manual

Local Oscillator Frequency

To change the selected local oscillator frequency for the satellite dish
LNB, use the
then press the
To change the local oscillator frequency, use the alphanumeric keypad
to enter the new value, and then press the
Button to complete your changes.
ENTER
The range of the local oscillator frequency should be 0 MHz, 4500 to
5500 MHz, or 9500 to 11500 MHz.

Downstream Frequency

The downstream frequency is the frequency which is used for sending
a signal to earth from a satellite and is measured in MHz.
To change the downstream frequency, use the
Buttons to highlight the F Field, then press the
Button.
ENTER
To change the downstream frequency, use the alphanumeric keypad to
enter the new value, and then press the
Button to complete your changes.
The absolute value of the difference between the downstream
frequency and the local oscillation frequency should be in the range of
950 to 2150 MHz.
or Direction Buttons to highlight the LO Field,
Direction Button or
XFTP SAT LITE Satellite Meter - Operation Manual
Button.
ENTER
Direction Button or
or
Direction Button or
Direction Button or
Direction
ENTER
23