Connecting To The Color Monitor - Sony SS-X7A Operating Instructions Manual

Connecting to the Color Monitor

Press the button
Red button
and insert the cord
into the proper
terminal.
Red cord
Pull the cord
slightly to make
sure it is
connected firmly.
Black cord
Right
speaker
Speaker terminals of the monitor
16
Before connecting the speaker system, be sure to turn off
the connected equipment such as a color monitor or an
amplifier.
Connect one end of the speaker cord to the speaker
terminals on the monitor and the other end to the speaker
terminals on the speaker.
The right speaker is connected to the right speaker terminals
on the monitor, and the left speaker is to the left terminals.
Match the polarity of the speaker terminals with the polarity
of the speaker terminals on the monitor, ' to ' with the
red cord and ' to ' with black cord.
Black button
Notes
• Be careful not to short-circuit the speaker terminals
according to the wire sticking out of the insulation.
• Connect the speaker cords with correct polarity. Correct
'' connections of both speaker systems insures proper
inphase operation. If the speaker system is out-of-phase,
the bass tones seem to be missing and the position of the
sound sources become obscure.
• When connecting to a monitor with a bass boost function,
turn on the bass boost function.
Left
speaker • Do not connect the speakers to both an amplifier and a
monitor at the same time. Otherwise, the excessive electric
current may flow from the amplifier to the monitor via the
speader cord, which may damage the monitor.
3-859-708-01(1)