Connecting To The Monitor - Sony SS-X500A Operating Instructions Manual

Connecting to the Monitor

Press the button
Red
and insert the
buttons
cord into the
proper terminal.
Black
buttons
Pull the cord
slightly to make
Red
sure it is
cord
connected firmly.
Right
speaker
Speaker cord holders
12
SPEAKERS
(6-16 Ω)
+ +
L R
– – –
Red
Black cords
cord
Left
speaker
Before connecting the speakers to the monitor, be
sure to turn off the monitor's power.
Connect the speakers to the monitor while the panel cover
on the monitor is open.
For details on how to install the speakers to the monitor, see
"Installing the Speakers" on page 7.
1
Connect the speaker cords to the monitor speaker
terminals.
Make sure the R (Right) speaker and L (Left) speaker
are connected to the R (Right) terminals and L (Left)
terminals on the monitor respectively.
Match the polarity of the speaker terminals with the
polarity of the speaker terminals on the monitor, ' to
' with the red cord and ' to ' with black cord.
2
Connect the speaker cords to the speakers.
Make sure to connect the R (Right) cord to the right
speaker and the L (Left) cord to the left speaker.
When you connect the cord to the right speaker, pull out
the cord from under the monitor panel cover and lay it
under the monitor to the right speaker.
Use the supplied speaker cord holders to tuck the cord.
For details on how to attach the speaker cord holder,
see "To install the speaker cord holders" on next page.
Similarly, when you connect the cord to the left speaker,
pull out the cord from under the monitor panel cover
and lay it under the monitor to the left speaker.
Tuck any excess cord inside the panel cover.
3
Close the right and left panel covers.