Mounting - Rechner Sensors IAS-10 Series Instruction Manual

Mounting

Mounting: flush and non-flush mountable
Fig. 1 Flush mountable
Mounting / detectable
material
For flush mounting in metal or other materials. These sensors can be mounted close
together (see Fig. 1 and 3) and are specially designed for contact-less detection of solids or
liquids through non-metal containers.
For non-flush mounting in metal or other materials. When mounting two or more sensors
side by side a space / free zone must be provided (see Fig. 2 and 4). These are particularly
suitable for applications where you need a larger working range to the sensor size.
Fig. 3 Flush mountable
Two opposite sensors have to be mounted with a distance of at least 2.2 times the operating
i
distance (distance "a").
For non-flush mountable sensors, the zone without a thread has to be mounted with a distance
of at least 1.5 times the operating distance from the damping material (distance "b").
Fig. 2
"Zone without
a thread"
Fig. 4
a
b
Non-flush mountable
Mounting / detectable
material
Non-flush mountable
11