English; Mounting • Connection - Rechner Sensors LevelMaster Adjusting Instructions

English

Capacitive sensors with
ET = Easy Teach Push Button
1. Mounting
Mount and fix the sensor in the desired position. The sensor can be installed from above, below and from
the side. The mounting position is normally not relevant for the measurement. What is important is that
the acitve area of the sensor (PEEK tip) reaches into the container, such that it is completely immersed
into the product to be detected when the container is filled.
2. Electrical Connection
The electrical connection should be made according to the connection diagram below. Please consider
the technical specifications provided on the unit and the data sheet.
The sensor is delivered with adjusted nominal sensing distance (Sn) - Factory Settings -.
Connection diagram ET
NPN Antivalent (NO + NC)
PNP Antivalent (NO + NC)
8
function ET or ETW
ETW = Easy Teach by wire
Connection diagram ETW
NPN Antivalent (NO + NC)
PNP Antivalent (NO + NC)