Greenlee Cam Track 881 Instruction Manual page 16

Assembly and Operation Instructions
881 and 881CT with 1813 Bending Table (cont'd)
30. Rotate the pump control lever counterclockwise.
Activate the hydraulic pump to advance the shoe
until the yoke is aligned with the proper shoe yoke
pin hole (EMT or IMC/Rigid).
31. Apply a light coat of high pressure grease to
lubricate the yoke pin, then attach the yoke to the
shoe with the yoke pin (G). Secure the yoke pin with
a hitch pin clip (E).
32. Rotate the pump control lever clockwise to retract
the ram.
Greenlee Tools, Inc.
881 and 881CT Hydraulic Benders
33. Remove the vise unit from its position below the
follow bar. Slide the vise unit to the far end of the
bending table.
34. Insert the conduit to be bent. Rotate the pump
control lever counterclockwise and advance the
shoe until it nearly contacts the conduit.
16
4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070