PRESONUS Studio 24c Owner's Manual page 19

3 ConnectingtoaComputer
Ableton Live 5+
Apple Logic Pro/Express 7+:
1.启动逻辑Pro /表达。
2.转到逻辑|首选项|音频。
3.单击设备选项卡。
4.在"核心音频"选项卡上，选中"已启用"。
5.从设备菜单中选择Studio 24c。
6.你会被问到是否想重新启动Logic。点击"尝试(重新)发射。"
7.您的Studio 24c具有定制I/O标签，以更快的工作流程。要在"逻辑"中启用这些标签，请进入"选项|音频| I/O标签"。
8.弹出窗口中的第二列将命名为"由驱动程序提供"。激活Studio 24c的每个标签。完成后，关闭此窗口。
9.现在可以使用Studio 24c了。
1. Launch AbletonLive.
2. Go to Options | Preferences | Audio.
3. Choose Driver Type: ASIO | Audio Device: ASIO Studio 24c
4. Go to Input Config : Enable and select the desired Input channels.
5. Go to Output Config : Enable and select the desired Output channels.
6. YoumaynowselectyourStudio24cinputsand
outputs for each track created in Live.
1.发射易宝生活。
2.转到选项|首选项|音频。
3.选择驱动类型:ASIO |音频设备:ASIO Studio 24c
4.转到输入配置:启用并选择所需的输入通道。
5.转到输出配置:启用并选择所需的输出通道。
6.您现在可以为Live中创建的每个音轨选择您的Studio 24c输入和输出。
1. Launch LogicPro/Express.
2. Go to Logic | Preferences | Audio.
3. Click on the Devices Tab.
4. On the Core Audio tab, check Enabled.
5. Select your Studio 24c from the device menu.
6. You will be asked if you'd like to relaunch Logic. Click"try (re)launch."
7. Your Studio 24c features custom I/O labels for faster work flow.To enable
these labels for use in Logic, go to Options | Audio | I/O Labels.
8. The second column in the pop-up window will be named
"Provided by Driver." Activate each of these labels for your
Studio 24c. When you are done, close this window.
9. You are now ready to use your Studio 24c.
Studio 24c
17